| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | Online Technical Support |
|
Still deciding? Get samples of US$ 9000/Ton
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Basic Information
| Steel Grade | M2/SKH51/1.3343 |
| Dimension | Thickness 5-500mm / Diameter 10-500mm |
| Delivery Condition | Pre-harden or Annealed |
| Surface Treatment | Black Surface / Milled Surface |
| Production Condition | Two Sides Cut or Four Sides Cut for Flat Bar |
| Stock Quantity | 2500 tons |
| Ultrasonic Test | Sep1921-84 D/D or E/e with 100% Test |
| Lead Time | 7-10 days |
High Speed Steel 1.3343, SKH51, M2
M2 Steel is molybdenum high speed steel. Small carbide inhomogeneity and high toughness are its advantages. It is easy to overheating, so the temperature of quenching need to strictly control along with the protection of heat treatment.
Due to good hardness and wear-resistance, it is usually used in cutter for cuting the difficult cutting material, also suitable for mould vibration and shock loads mould.
| Grade | C | Si | Mn | P | S | Cr | Mo | W | V |
| W6o5Cr4V | 0.80-0.90 | 0.20-0.45 | 0.15-0.40 | ≤0.03 | ≤0.03 | 3.80-4.40 | 4.50-5.50 | 5.50-6.75 | 1.75-2.20 |
| M2 | 0.78-0.88 | 0.20-0.45 | 0.15-0.45 | ≤0.03 | ≤0.03 | 3.75-4.50 | 4.50-5.50 | 5.50-6.75 | 1.75-2.20 |
| 1.3343 | 0.80-0.88 | ≤0.45 | ≤0.40 | ≤0.03 | ≤0.03 | 3.80-4.50 | 4.70-5.20 | 5.90-6.70 | 1.70-2.10 |
| SKH51 | 0.80-0.88 | ≤0.45 | ≤0.40 | ≤0.03 | ≤0.03 | 3.80-4.50 | 4.70-5.20 | 5.90-6.70 | 1.70-2.10 |
FAQ
){kind=link}