1.2080 Flat D3 SKD1 Cr12 Cold Work Tool Steel

• Customization: Available
• Type: Steel Plate/Block or Round Bar
• Standard: ASTM, AISI, GB, JIS, DIN, BS
• Model NO.: 1.2080 D3 SKD1
• Surface Treatment: Black Surface/ Turning/ Grinding/ Milling
• Technique: Cold Drawn/ Hot Rolled/ Forged
• Application: Mold & Dies
• Special Use: Cutting Tools, Measuring Tools, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel
• Stock: Stock
• Origin: China

Product Description

Product Description

 

1.2080 D3 SKD1 Cr12 Cold Work Tool Steel

Equivalent Grade:

Standard	Grade
AISI/SAE	D3
W.Nr/DIN	1.2080
JIS	SKD1
GB	Cr12

 

Typical Chemical Composition (%)

C	Si	Mn	Cr
1.90-2.20	0.10-0.40	0.15-0.45	11.00-12.00

 

Hot Forming:

Forging: 1050 to 850ºC, slowing cooling in furnace.

Heat Treatment:

Annealing: 800 to 850ºC, slow cooling in furnace (10-20ºC/hr), down to approx. 600ºC, cooling in air. Hardness after annealing: max. 250HB.

Stress relieving: approx. 650ºC, slow cooling in furnace. Hold in neutral atmosphere for 1 to 2hours.

Hardening: 930 to 960ºC, oil, salt bath(220 to 250ºC or 500 to 550ºC), quenching in forced air, for thickness up to 30mm. Hardness obtainable, 63 to 64 HRC.

Tempering: As required. Slowly heating to tempering temperature right after hardening. Recommended to temper 2 or 3 times to increase toughness.

Tempering ºC	200	300	400	500	600
HRC	63	60	58	55	48

* Hardening temperature: 950ºC, specimen size: dia25mm

Properties:

Classic high chromium cold work steel. High wear resistance due to its ledeburitic structure, very good deep hardening properties and dimensional stability. Moderate toughness.

Applications:

High performance blanking and punching dies for sheet thickness up to 3 mm; circular and flat shear blades for sheet thickness up to 2 mm; cold drawing tools, broaches; tools for the production of nails, screws, nuts and rivets; cold extrusion tools; cold hobbing tools; flanging rolls; guide rolls; rollers of all shapes for continuous production of steel tubes and profiles; cold forming tools for ceramics and powder metallurgy and similar tools.

Available Size:

Round:	Dia 2-12mm	Cold Rolled
	Dia 12-200mm	Hot Rolled
	Dia 50-600mm	Hot Forged
Flat/Suare:	Thickness	1-2.5mm	Cold Rolled
		12-200mm	Hot Rolled
		20-500mm	Hot Forged
	Width	800mm Max.

Detailed Photos

 

FAQ

 

FAQ


Q1: Are you a manufacturer or merely a trader? 
A1: We are not only a stockist of Hot rolled products but also a manufacturer of forged products with our own Forging Mill

Q2: What do you do to control the quality?
A2:  Before loading, our products will all be inspected by ultrasonic inspection. Quality Grade conforms to SEP 1921-84 E/e, D/d, C/c as per the customer's request.

Q3:: What are your hot-selling products?
A3: S50C, 1.2311, D2/1.2379, H13/1.2344, CR12MOV, DC53, CR8, abundant stock for both plates and rounds. Competitive prices and short lead-time.

Q4: Can we visit your company and factory? 
A4: Yes, warmly welcome! We will book the hotel and assign our driver to pick you up at the airport when you visit.