SKD61 H13 Forged Round Bar 1.2344 Special Tool Steel

• Customization: Available
• Type: Steel Plate/Block/Round Bar
• Standard: ASTM, AISI, GB, JIS, DIN, BS
• Model NO.: H13 1.2344 SKD61
• Surface Treatment: Black/Milled/Turned/Polish
• Technique: Hot Rolled/Forged
• Application: Mold & Dies, Flange Plate
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Mold Making
• Stock: Stock
• Origin: China

Product Description

Product Description

 

SKD61 H13 Forged Round Bar 1.2344 Special Tool Steel

It has air hardening with good toughness, resistance to abrasion and high red hardness. It resists softening to 550°C and has good resistance to heat checking. Will Nitride with a case hardness over 1000 V.P.N. Generally supplied annealed to HB 230 max.

Equivalent grades:

Standard	AISI/SAE	W.Nr/DIN	JIS	GB
Grade	H13	1.2344	SKD61	4Cr5MoSiV1

 

Typical Chemical Composition of H13 / 1.2344 /SKD61 (%)

C	Si	Mn	P	S	Cr	Mo	V
0.35-0.45	0.80-1.20	0.20-0.50	≤0.03	≤0.03	4.80-5.50	1.20-1.75	0.90-1.20

 

Hot Forming:

Forging: 1100 to 900ºC, slow cooling in furnace.

Heat Treatment of H13 / 1.2344 / SKD61 steel

Annealing: 750 to 800ºC, slow cooling in furnace (10-20ºC/hr), down to 600ºC, cooling in air. Hardness after annealing: max. 230 HB.

Stress relieving: 600 to 650ºC, slow cooling in furnace. Hold in neutral atmosphere for 1 to 2hours.

Hardening: 1020 to 1080ºC, oil/air, hold 20 to 30 minutes. Hardness , 52 to 56 HRC in oil, 50 to 54 HRC in air.

Tempering: 560 to 580ºC. Slowly heating to tempering temperature right after hardening. Recommended to temper at least twice. The second tempering temperature shall be approx. 20 to 30ºC lower than the first tempering.

Tempering ºC	300	400	500	600
HRC	53	54	55	50

* Hardening temperature: 1050ºC, specimen size: dia50mm
 

Detailed Photos

 

FAQ

 

FAQ


Q1: Are you a manufacturer or merely a trader? 
A1: We are not only a stockist of Hot rolled products but also a manufacturer of forged products with our own Forging Mill

Q2: What do you do to control the quality?
A2:  Before loading, our products will all be inspected by ultrasonic inspection. Quality Grade conforms to SEP 1921-84 E/e, D/d, C/c as per the customer's request.

Q3:: What are your hot-selling products?
A3: S50C, 1.2311, D2/1.2379, H13/1.2344, CR12MOV, DC53, CR8, abundant stock for both plates and rounds. Competitive prices and short lead-time.

Q4: Can we visit your company and factory? 
A4: Yes, warmly welcome! We will book the hotel and assign our driver to pick you up at the airport when you visit.