Product Description
1.2714 Hot Work Tool Steel SKT4 Forged Round Bar L6 5CrNiMoV High Quality
Equivalent Grades:
| Standard |
AISI/SAE |
W.Nr/DIN |
JIS |
GB |
| Grade |
L6 |
1.2714 |
SKT4 |
5CrNiMoV |
Typical Chemical Composition of 1.2714 (%)
| C |
Si |
Mn |
Cr |
Mo |
V |
Ni |
| 0.50-0.60 |
0.10-0.40 |
0.60-0.80 |
0.80-1.20 |
0.35-0.50 |
0.05-0.15 |
1.50-1.80 |
Hot Forming:
Forging: 1100 to 850ºC, slowing cooling in furnace.
Heat Treatment:
Annealing: 650 to 700ºC, slow cooling in furnace (10-20ºC/hr), down to 600ºC, cooling in air. Hardness after annealing: max. 250 HB.
Stress relieving: approx. 650ºC, slow cooling in furnace. Hold in neutral atmosphere for 1 to 2hours.
Hardening: 830 to 870ºC, oil/870 to 900ºC, air, hold 15 to 30 minutes. Hardness , 52 to 58HRC in oil, 44 to 50 HRC in air.
Tempering: 300 to 600ºC. Slowly heating to tempering temperature right after hardening. Recommended to temper at least twice.
| Tempering ºC |
300 |
400 |
500 |
600 |
| HRC |
52/50 |
50/47 |
46/44 |
40/38 |
* Hardening temperature: 850ºC oil/880ºC air, specimen size: dia60mm
Surface Treatment
Nitriding: possible within limits.
Properties
Die block steel with high performance for forging dies. Good toughness, deep hardening properties and compressive strength.
Applications:
Dies of all kind for hammer and forging of steel; tools for rods and tube extrusion; forming dies; hot stamping dies for aluminium, bending and embossing tools; plastic moulds.
| Available Size: |
| Round: |
Dia 50-800mm |
Forged |
| |
| Flat/Square: |
Thickness |
20-350mm |
Hot Forged |
| |
Width |
1200mm Max. |
Detailed Photos
FAQ
FAQ
Q1: Are you a manufacturer or merely a trader?
A1: We are not only a stockist of Hot rolled products but also a manufacturer of forged products with our own Forging Mill
Q2: What do you do to control the quality?
A2: Before loading, our products will all be inspected by ultrasonic inspection. Quality Grade conforms to SEP 1921-84 E/e, D/d, C/c as per the customer's request.
Q3:: What are your hot-selling products?
A3: S50C, 1.2311, D2/1.2379, H13/1.2344, CR12MOV, DC53, CR8, abundant stock for both plates and rounds. Competitive prices and short lead-time.
Q4: Can we visit your company and factory?
A4: Yes, warmly welcome! We will book the hotel and assign our driver to pick you up at the airport when you visit.
Audited Supplier 
){kind=link}