| Customization: | Available |
|---|---|
| Type: | Steel Plate/Block or Round Bar |
| Standard: | ASTM, AISI, GB, JIS, DIN, BS |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.2080 SKD1 Forged Tool Steel D3 Cr12 Round Bar
|
Standard |
Grade |
|
AISI/SAE |
D3 |
|
W.Nr/DIN |
1.2080 |
|
JIS |
SKD1 |
|
GB |
Cr12 |
Typical Chemical Composition (%)
|
C |
Si |
Mn |
Cr |
|
1.90-2.20 |
0.10-0.40 |
0.15-0.45 |
11.00-12.00 |
Hot Forming:
Forging: 1050 to 850ºC, slowing cooling in furnace.
Heat Treatment:
Annealing: 800 to 850ºC, slow cooling in furnace (10-20ºC/hr), down to approx. 600ºC, cooling in air. Hardness after annealing: max. 250HB.
Stress relieving: approx. 650ºC, slow cooling in furnace. Hold in neutral atmosphere for 1 to 2hours.
Hardening: 930 to 960ºC, oil, salt bath(220 to 250ºC or 500 to 550ºC), quenching in forced air, for thickness up to 30mm. Hardness obtainable, 63 to 64 HRC.
Tempering: As required. Slowly heating to tempering temperature right after hardening. Recommended to temper 2 or 3 times to increase toughness.
|
Tempering ºC |
200 |
300 |
400 |
500 |
600 |
|
HRC |
63 |
60 |
58 |
55 |
48 |
* Hardening temperature: 950ºC, specimen size: dia25mm
Properties:
Classic high chromium cold work steel. High wear resistance due to its ledeburitic structure, very good deep hardening properties and dimensional stability. Moderate toughness.
Applications:
High performance blanking and punching dies for sheet thickness up to 3 mm; circular and flat shear blades for sheet thickness up to 2 mm; cold drawing tools, broaches; tools for the production of nails, screws, nuts and rivets; cold extrusion tools; cold hobbing tools; flanging rolls; guide rolls; rollers of all shapes for continuous production of steel tubes and profiles; cold forming tools for ceramics and powder metallurgy and similar tools.
Available Size:
| Round: | Dia 2-12mm | Cold Rolled | ||
| Dia 12-200mm | Hot Rolled | |||
| Dia 50-600mm | Hot Forged | |||
| Flat/Suare: | Thickness | 1-2.5mm | Cold Rolled | |
| 12-200mm | Hot Rolled | |||
| 20-500mm | Hot Forged | |||
| Width | 800mm Max. | |||
FAQ
Q1: Are you a manufacturer or merely a trader?
A1: We are not only a stockist of Hot rolled products but also a manufacturer of forged products with our own Forging Mill
Q2: What do you do to control the quality?
A2: Before loading, our products will all be inspected by ultrasonic inspection. Quality Grade conforms to SEP 1921-84 E/e, D/d, C/c as per the customer's request.
Q3:: What are your hot-selling products?
A3: S50C, 1.2311, D2/1.2379, H13/1.2344, CR12MOV, DC53, CR8, abundant stock for both plates and rounds. Competitive prices and short lead-time.
Q4: Can we visit your company and factory?
A4: Yes, warmly welcome! We will book the hotel and assign our driver to pick you up at the airport when you visit.
){kind=link}