Type: | Plates/Blocks/Rounds |
---|---|
Standard: | ASTM, AISI, GB, JIS, DIN, BS |
Certification: | ISO, RoHS, IBR |
Surface Treatment: | Black/Milled/Ground/Turned |
Technique: | Hot Rolled/Forged/Cold Draw |
Application: | Mold & Dies |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
It's medium alloyed cold work steel, with high hardening capacity, good compressive strength.
Equivalent Grade:
Standard |
Grade |
AISI/SAE |
O2 |
W.Nr/DIN |
1.2842 |
Typical Chemical Composition (%)
C |
Si |
Mn |
Cr |
V |
0.85-0.95 |
0.10-0.40 |
1.90-2.10 |
0.20-0.50 |
0.05-0.15 |
Heat Treatment:
Annealing: 700 to 730ºC, slow cooling in furnace (10-20ºC/hr), down to approx. 600ºC, cooling in air. Hardness after annealing: max. 230HB.
Stress relieving: approx. 650ºC, slow cooling in furnace. Hold in neutral atmosphere for 1 to 2hours.
Hardening: 790 to 820ºC, oil. Quenching: oil. Hardness obtainable, 60 to 64 HRC.
Tempering: Slowly heating to tempering temperature right after hardening. Recommended to temper 2 or 3 times to increase toughness.
Tempering ºC |
100 |
200 |
300 |
400 |
500 |
HRC |
64 |
62 |
57 |
52 |
46 |
* Hardening temperature: 800ºC, specimen size: dia25mm
Properties:
Oil hardening type cold work steel. Good dimensional stability, edge retaining and toughness. Deep hardening properties can be considered as good for smaller and medium-sized sections.
Applications:
Blanking and punching dies for sheet thickness up to 6 mm; small straight and circular shear blades, also for paper and plastics; thread cutting tools; gauges and other measuring tools; cold trimming tools; small inserts for plastic moulds and similar tools.
Available Size:
|
||||
Round: | Dia 12-150mm | Hot Rolled | ||
Dia 50-600mm | Forged | |||
Flat/Square: | Thickness | 10-120mm | Hot Rolled | |
30-350mm | Hot Rorged | |||
Width | 800mm Max. |
Suppliers with verified business licenses